| View previous topic :: View next topic |
| Author |
Message |
ddo2000
Joined: 10 Jan 2010
Posts: 1
|
 Posted: Sun Jan 10, 2010 5:15 pm Post subject: e85 in high compression methanol engine? |
 |
|
| I just bought a 14.2 to 1 engine, it's a 430 aluminum rodeck with 12 degree brodix heads. it's a dirt track motor. I'm going to run an f2 procharger on it, but would like to run the thing in my chevelle for a while this year while saving for the new build. It's an alcohol motor complete with carb and all. First question, has anyone personally ran this much compression on e85 and is it advisable to run the alcohol carb. Thanks in advance! |
|
| Back to top |
|
 |
ron
Joined: 27 Feb 2009
Posts: 16
Location: NY
|
| Posted: Tue Jan 12, 2010 1:03 am Post subject: |
|
|
ddo2000 Yes you can run 14.2 to 1 with e85 (summer blend) and no the alcohol carb set up would flow to much fuel, about 70% more than would be needed to run e85 properly. Don't know what you have for a carb, but whatever it is, it probaly will have to be recalibrated for e85. Hope this helps Ron
_________________
ron |
|
| Back to top |
|
|
440Jim
Joined: 01 Jan 2008
Posts: 188
|
| Posted: Sat Jan 23, 2010 10:25 am Post subject: |
|
|
| My drag race engine runs on summer grade E85. This engine is 511 CID, 13.5 compression ratio, with a cam of 279 degrees duration at 0.050" tappet lift. I have also run it on methanol. Different calibrations for different fuels (mechanical injection). Not the same carb. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
