Obormot
Joined: 27 Jun 2008 Posts: 44 Location: Ukraine
|
Posted: Thu Apr 07, 2011 4:45 am Post subject: Bio adapter version 3.0 available |
|
|
Compatibility:
* Fits to ANY electronic monopoint or multipoint port fuel injection system.
* Can work with injector connectors of any polarity.
* Can work with any signal type: by -12V and by +12V.
* Compatible with variable displacement engines with cylinders deactivation.
* Can be installed to 1, 2, 3, 4 cylinder engines.
* For 5, 6, 8 cylinder engines you need to install 2 adapters, for 10 or 12 cylinders - 3 adapters.
Easy installation:
* No cutting wires, no soldering - connecting into stock injector connectors.
* Can be installed and removed quickly and without any traces.
* You don't need to use any testers or scanners for installation.
* You don't need to check injector connectors polarity or signal type before order or while installation.
* Just plug it to injector connectors, than plug -12V wire from battery or from grounding point and secure adapter under the hood.
Easy using:
* Cold start function.
* Automatic mode.
* Very simple user interface.
* Service menu for advanced users, no need to use additional devices for fine tuning.
Accurate adjusting:
* Fully digital - microprocessor inside.
* Accurate adjusting - 1% step, no knobs or potentiometers.
Reliable:
* Manual modes, you still can drive on E85 even if your oxygen (lambda) sensor will be damaged.
* Sealed waterproof case.
* Sealed waterproof injector connectors.
* 3 year warranty.
http://bioadapter.com/product_info.php?cPath=28&products_id=45
 _________________ European E85 conversion kit
http://bioadapter.com |
|